My Cart

You have no items in your shopping cart.

Part # QTY:
Online Store
Customer Service

You're currently on:

Model 32 Hydraulic Bender

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Model 32 Hydraulic Bender

Availability: In stock.

Add Items to Cart
  • |

Quick Overview

Model 32 Hydraulic
Product Description




Model 32 Hydraulic Bender
with 10 Ton Hydraulic Cylinder (less hose and pump)

What do you do when you make the best, USA made, tubing bender in the world?

You Make It Better!!

The Model 32 bender is essentially a super heavy duty upgraded version of the best selling, USA made, tubing bender in the world, the "Model 3".
When the Model 3 was initially released in the mid 1980's, it was designed as a mechanical tubing bender targeted to the race car builders who wanted an affordable bender that still produced quality bends. Hydraulics weren't thought of or added until years later.
Fast forward to present day, and builders and fabricators have changed gears. Now builders and fabricators need to bend heavier tubing such as 2" O.D. x .250 wall D.O.M. tubing, and thin wall tubing is now more common than it was back then.
The basic design of the Model 3 was nearly impossible to beat,so the answer was to simply make it better.
The Model 32 is the Result!
Differences between the two benders are:
Frame strength has been more than doubled.

7/8" diameter 100,000 psi alloy pins were upgraded to 1-1/4" diameter.

A die locking mechanism was designed that both helps bend thin wall tubing as well as very heavy walled tubing by preventing the die from relaxing when not bending. Springback is the #1 cause of wrinkling thin walled tubing.

 The Model 32 has been designed for mechanical or hydraulic operation from day one. Its hydraulic swivel block rotates on the cylinders true center axis thereby eliminating side load on the ram during bending. This greatly extends the life of the cylinder. A one piece steel ram yoke with quick disconnect pin is now incorporated as well.

An anti-springback ratchet is now included free with the bender. This allowed us to design a new ratchet lever system with more than a 20% reduction in bending effort.

Geometry of the bender itself was altered to better take advantage of the new generation 3 follow bars thus yielding better bends.

The drive links and drive pin is designed to be the weak link. This protects the expensive frames in the case of overload. Believe us, somebody somewhere will try to bend solid 2" diameter steel. We did and true to design, the drive links and drive pin bent first.

Drive link bolts and sleeves sizes have increased from 1/2" diameter to 3/4" to handle the extra load.


Designed with durability and affordability in mind. All parts are 100% CNC machined. The frame links are machined from 3/4" thick steel and the drive links are made from 1/2" thick cold rolled steel. Compared to the Model 3's 7/8" diameter pins the Model 32 utilizes extra large 1-1/4" diameter 100,000 PSI alloy pins to handle the tough bends. Fast change bending dies are CNC machined from solid steel billets and carry a lifetime guarantee against breakage. Steel dies eliminate the problems common with other manufacturers' aluminum dies, such as breakage and groove spreading when bending 4130 chromemoly tubing.


Bends round tubing and pipe from 1/2" to 2-1/2" O.D. and square tubing from 1/2" to 1-1/2". This bender is rated to bend 2" O.D. x .250" wall DOM steel tubing. Also capable of solid steel in excess of 1-1/2" diameter. NOTE: To bend round tubing over 2" O.D. x .120" wall, square tubing over 1-1/2" or solids over 1" diameter requires hydraulics.


With the degree indicator wheel standard on every Model 32, accurate bending is simply a matter of watching the pointer until the degree of bend you desire is reached. High contrast yellow markings on a black wheel provide excellent readability while bending.


Standard on every Model 32 is the die locking mechanism. As the die rotates while bending the drive holes in the forming die pass under the lock pin. When the drive hole is below the lock pin, it drops into the drive hole and when pressure is removed from the bender the die's rotation is locked at that position. When bending resumes the ramp machined into the lock pin will automatically lift the pin out of the drive hole. This mechanism combined with the included anti-springback ratchet allows the Model 32 to better bend thin wall tubing as well as the heavier sizes of tubing such as 2" O.D. x .250" wall DOM tubing.


Standard on every Model 32 is a quick adjust degree indicator wheel. Simply loosen the lower nut, rotate the degree wheel to zero degrees and using finger force only, tighten in position.


They are half the weight of the older style and utilize bolt-on inserts that are on average 243% stronger. Insert pads are machined to within 1/1000th of a degree to the theoretically perfect angle for optimum bend quality. Inserts are made from a non-galling bearing material to prevent scratching of expensive material. Delrin inserts are also available for use with polished aluminum. A roll pin holds the follow bar in position while loading tubing.  With over 600 hours in R&D and tooling preparation, we are confident these are the best die sets on the market today.


The hydraulic swivel block rotates on the cylinders true center axis thereby eliminating side load on the ram during bending. This greatly extends the life of the cylinder. A one piece steel ram yoke with quick disconnect pin is now incorporated as well.


3600 East Truman Road - Kansas City, MO 64127|TEL: (816) 241-5550|FAX: (816) 241-7707
1501 NW Lower Silver Lake Road - Topeka, KS 66608|TEL: (785) 233-0555|FAX: (785) 233-0566
Copyright © METAL by the FOOT, Inc. All rights reserved.     Site By: elonBLUE